Easy Steps To Install Landscaping Pavers
Landscaping pavers – Starting with create a base for landscaping pavers. Lay several inches of crushed stone, gravel or limestone. Thickness depends on the softness of the ground. If you’re dealing with clay, for example, use a thicker layer. Spread of crushed stone in three layers. Face of the stone in a circular motion with a compressing machine. Set edges around the boundary of the area to be paved. They will keep the asphalt pavers from separation.
Spread sand over the stone. Make layer 1 1/2 inches thick, so there is enough for landscape pavers to sit in. But not enough to sink in. Lay down landscaping pavers in your chosen design. Place them as close together as possible. Cut them to size if necessary, with a mechanical splitter or so. Compact landscaping pavers in place using a mechanical compactor.
20 Photos Gallery of: Easy Steps to Install Landscaping Pavers
Run the machine over the area repeatedly pressing the landscape pavers into the sand. Sweep sand of the paved surface to fill the joints. Use dry, fine-grained sand, because it compresses quickly and firmly. Protect landscaping pavers with sand-binding sealant to keep the sand in the joints from undermining. It will also prevent stains and keep weeds from growing between pavers. Follow the manufacturer’s guidelines.